LAB SCALE STUDY OF HRT AND OLR OPTIMIZATION IN A UASB TREATING SLAUGHTERHOUSE WASTEWATER

Martha N. Chollom, Sudesh Rathilal, Feroz M. Swalaha, Babatunde F. Bakare, Emmanuel Kweinor Tetteh

Abstract


As the quality of most water sources and the environment continue to deteriorate, the public is increasingly concerned about the issues of sustainability. To combat this, strict policies and legislations are being placed to enable the treatment of wastewaters before discharging and possibly reusing it.  Animal slaughterhouses have proven to be important sources of wastewater with high levels of organics such as chemical oxygen demand (COD), biological oxygen demand (BOD), total suspended solids (TSS), volatile suspended solids (VSS), fats and proteins. Discharging wastewater without any form of treatment into receiving water bodies has shown to contaminant water sources and as well to be detrimental to aquatic animals. Anaerobic processes have been proposed as a good alternative for the treatment of wastewaters with high or medium organic loads. The production of biogas through anaerobic digestion offers substantial advantages over other biological methods of waste treatment. The aim of this study was to elucidate the effect of process operational parameters on the performance of an up-flow anaerobic sludge blanket reactor (UASB). The reactor was used for the treatment of a synthetic wastewater which was synthesised to emulate that obtainable from a slaughterhouse. Organic loading rate (OLR) was increased by varying the hydraulic retention times (HRT) from 8−16 hours. The temperature of the reactor was maintained at a constant 35 ̊C while the pH was varied from 6.5 to 7.5. The result of the work indicated an optimum OLR of 4.5−7.5 kgCOD.m-3.d-1 and an optimum COD of 75−86%. Similarly, a biogas yield of 2850 ml/day was found to be the highest at a HRT of 12 hours at the optimum OLR. At the highest OLR, flotation occurred and consequently the active biomass was washed out from the reactor. The results indicated that anaerobic treatment systems are applicable to the treatment of wastewaters with high levels of organics.

Keywords


Anaerobic digestion, hydraulic retention times, organic loading rate, chemical oxygen demand, slaughterhouse wastewaters, biogas

Full Text:

PDF

References


APHA/AWWA/WEF. (2012). Standard Methods for the Examination of Water and Wastewater. Standard Methods, 541. https://doi.org/ISBN 9780875532356

Bustillo-Lecompte, C. F., & Mehrvar, M. (2015). Slaughterhouse wastewater characteristics, treatment, and management in the meat processing industry: A review on trends and advances. Journal of Environmental Management, 161, 287–302. https://doi.org/10.1016/j.jenvman.2015.07.008

Bustillo-Lecompte, C. F., & Mehrvar, M. (2017). Treatment of actual slaughterhouse wastewater by combined anaerobic–aerobic processes for biogas generation and removal of organics and nutrients: An optimization study towards a cleaner production in the meat processing industry. Journal of Cleaner Production, 141, 278–289. https://doi.org/10.1016/j.jclepro.2016.09.060

Chollom, M. N., Rathilal, S., Pillay, V. L., & Alfa, D. (2015). The applicability of nanofiltration for the treatment and reuse of textile reactive dye effluent. Water SA, 41(3), 398–405. https://doi.org/10.4314/wsa.v41i3.12

Dasgupta, J., Sikder, J., Chakraborty, S., Curcio, S., & Drioli, E. (2015). Remediation of textile effluents by membrane based treatment techniques: A state of the art review. Journal of Environmental Management, 147, 55–72. https://doi.org/10.1016/j.jenvman.2014.08.008

Gerbens-Leenes, P. W., Mekonnen, M. M., & Hoekstra, A. Y. (2013). The water footprint of poultry, pork and beef: A comparative study in different countries and production systems. Water Resources and Industry, 1–2, 25–36. https://doi.org/10.1016/j.wri.2013.03.001

Jha, P., Kana, E. B. G., & Schmidt, S. (2017). Can artificial neural network and response surface methodology reliably predict hydrogen production and COD removal in an UASB bioreactor? International Journal of Hydrogen Energy, 42(30), 18875–18883. https://doi.org/10.1016/j.ijhydene.2017.06.063

Kweinor Tetteh, E., Muñoz Torre, R., & Aizpuru, A. (2017). Nitrate recycling from centrate as a strategy to mitigate odour release. Industriales, Escuela D E Ingenierias, (Semestre Internacional). https://doi.org/http://uvadoc.uva.es/handle/10324/26109

Lettinga, G., & Pol, H. (1991). UASB Process design for various types of wastewaters. Water Science and Technology, 24(8), 87–107.

Tetteh, E. K., Rathilal, S., & Chollom, M. N. (2017). Treatment of Industrial Mineral Oil Wastewater - Optimisation of Coagulation Flotation process using Response Surface Methodology (RSM). International Journal of Applied Engineering Research, 12,(23), 13084–13091. Retrieved from ISSN 0973-4562

Tetteh, E. K., Rathilal, S., & Robinson, K. (2017). Treatment of industrial mineral oil wastewater – effects of coagulant type and dosage. Water Practice and Technology, 12(1), 139–145. https://doi.org/10.2166/wpt.2017.021

Torkian, A., Eqbali, A., & Hashemian, S. J. (2003). The effect of organic loading rate on the performance of UASB reactor treating slaughterhouse effluent. Resources, Conservation and Recycling, 40(1), 1–11. https://doi.org/10.1016/S0921-3449(03)00021-1




DOI: http://dx.doi.org/10.12955/cbup.v6.1290

Refbacks

  • There are currently no refbacks.


Print ISSN 1805-997X, Online ISSN 1805-9961

(c) 2018 CBU Research Institute s.r.o.

For more information on the conference visit cbuic.cz